Water pressure booster pump in Batumi
Weak pressure on upper floors or water vanishing during the day — we find the cause and fit a pump, a pump station or a tank. Measure first, then fix.
Water pressure pump — prices and estimate
Labour prices. Materials and equipment are on the estimate or yours. Enter quantities — the total updates instantly and goes to WhatsApp as a ready message.
When you need a pump or a tank
- In the evening the tap barely runs and the shower is weak
- The gas boiler won't fire up because pressure is too low
- The washing machine takes ages to fill and shows an error
- Water cuts are frequent and you have Airbnb guests
- Pressure dropped sharply after filters were installed
- Pressure is too high instead: pipes bang, mixers drip
What’s included
- Pressure measurement — with a gauge at the flat inlet and at the taps
- Finding the cause — filters, aerators, reducer or building pressure
- Pump selection — sized for your flat's demand, not the biggest one
- Pump station — with a pressure tank so the pump doesn't start at every tap
- Storage tank — a water reserve for supply cuts
- Pressure reducer — protects mixers and the water heater from spikes
- Pipework — non-return valve, shut-off valves and a filter before the pump
How we work
- 1
Diagnostics
- 2
Choosing a solution
- 3
Installation
- 4
Setup and check
Related jobs
More services: plumber
All pricesFAQ
How much does it cost to fix low pressure?
Low pressure diagnostics is 50 ₾, installing a booster pump from 150 ₾, a pump station with a tank from 250 ₾. Sometimes cleaning a filter or replacing a reducer is enough.
Will a pump help if there is no water at all?
No. A pump only boosts pressure when there is water in the pipe. For supply cuts you need a storage tank: it fills while water is on and feeds the flat through a pump when it is off.
Why is pressure weak on upper floors in Batumi?
In high-rises the building supply can fall short of the top floors at peak hours. But the cause is sometimes inside the flat: a clogged filter, a faulty reducer or narrow pipes. That is why we start by measuring.
Will the pump be noisy?
You will hear a pump, especially at night. We mount it on anti-vibration feet away from bedrooms, and a station with a pressure tank starts less often. For a small boost there are compact quiet models.
Where can a storage tank go?
It needs space and a solid base, as water is heavy. Usually a storeroom, bathroom or balcony. On a balcony we shade the tank from the sun; for shared areas, check with your building management first.
Water pressure booster pump in Batumi
The shower on the twentieth floor barely trickles, the washing machine shows a water intake error, and the gas water heater will not ignite because the pressure is too low. In Batumi's high-rises the mains pressure at peak times sometimes cannot reach the upper floors. But do not rush to buy equipment: sometimes the cause is inside the apartment itself and can be fixed in half an hour. That is why installing a water pressure booster pump in Batumi always starts with a measurement.
Diagnostics first
The plumber measures the pressure at the inlet and at every outlet, and checks the filters, tap aerators and the pressure reducer. A clogged whole-house filter or a faulty pressure reducer gives the same picture as low pressure in the building. Diagnostics cost from 50 ₾, and if the problem is a cartridge or the reducer, you will not have to buy anything. Replacing a pressure reducer starts from 50 ₾.
Pump, pump station or tank
- A booster pump, from 150 ₾ for installation, is fitted into the pipe and switches on when a tap is opened. Suitable if there is water in the pipe but not enough of it.
- A pump station with a pressure vessel, from 250 ₾, keeps a reserve of water under pressure. The motor starts less often, runs more quietly and wears less.
- A storage tank, from 200 ₾, is needed for supply cuts. It is important to understand: no unit creates water, and if the pipe is empty there is nothing to pump. A tank with a reserve is exactly what helps on those days.
We buy the equipment as part of the estimate, equipment you have bought yourself is also fine, and we fix the price of the work in advance.
When the pressure is too high instead
On the lower floors the opposite happens: taps bang when they close, flexible hoses wear out fast, and the water heater keeps discharging water through its valve. What is needed here is not a pump but a pressure reducer at the inlet. It lowers the pressure to a safe level and protects all the plumbing in your apartment.
Will it be noisy
You can hear a pump running, especially at night in a quiet apartment. We mount it on anti-vibration feet, and if a bedroom is next to the installation point, a compact quiet model can be chosen. A pump station with a pressure vessel starts less often than a simple model, and that also reduces noise.
Where to put the tank
A tank needs space and a solid base: a full tank weighs as much as the water in it. A storeroom, bathroom or balcony usually works. If you want to put it in a shared corridor or a utility room, this has to be agreed with the management company.
How installation works
- We measure the pressure and look for the cause.
- We choose a pump, pump station or tank and fix the price.
- We fit the equipment with isolation valves, a filter and a non-return valve.
- We set the cut-in pressure and check the flow at every outlet.
We guarantee the pipework and installation for 12 months.
Let's fix your water pressure
Tell us your floor, what works badly and when — we will say whether you need a pump and give you a price before work starts.