Discuss your project

Apartment rewiring in Batumi

We replace old and aluminium wiring with copper, run circuits to every room and connect the panel. Photo report and insulation test before walls are closed.

from 40 ₾ / m²≈ $15 / m²Price agreed upfrontPhotos of hidden work12-month warranty
Calculate the cost Message us on WhatsApp
5.02 reviews on Google3.82 reviews on Trustpilot
Apartment rewiring in Batumi

Apartment rewiring — prices and estimate

Labour prices. Materials and equipment are on the estimate or yours. Enter quantities — the total updates instantly and goes to WhatsApp as a ready message.

Cable runs to every room — labour from 40 ₾ / m²≈ $15 / m² m²
Including aluminium wiring from 8 ₾ / m²≈ $3 / m² m²
Concrete, brick, aerated block from 15 ₾ / lm≈ $6 / lm lm
Cable and outlet per point from 30 ₾ / point≈ $12 / point point
Report after installation from 100 ₾≈ $38 pcs
Total for the selected items
    Excludes materials and equipment. We confirm the exact price after a visit, before any work starts. Prices in GEL. ≈ $ at the National Bank of Georgia rate: 1 $ = 2,5992 ₾. Send estimate via WhatsApp

    When it's time to rewire

    • Older building with aluminium wires in the panel
    • Sockets and switches get warm or crackle
    • Breakers trip when you switch appliances on
    • Flickering lights or a smell of burnt insulation
    • Not enough circuits for AC units, water heater and hob
    • Full renovation or layout change
    Not sure this is what you need?Send a photo on WhatsApp — we’ll advise

    What’s included

    • Wiring plan — where sockets, lights and switches go, and which circuits
    • Old wiring removal — including aluminium and twisted joints in boxes
    • Copper cable of the right size — separate circuits for kitchen, water heater, AC
    • Chasing and cable laying — in concrete, brick and aerated block
    • Low-voltage — internet and TV to the rooms you need
    • Photo report before walls are closed — you see where every cable runs
    • Insulation resistance test — every circuit checked after installation

    How we work

    1. 1

      Survey and plan

      We look at the flat, panel and incoming cable and agree where points and separate circuits go.

    2. 2

      Estimate

      We price labour and materials and fix the price before starting.

    3. 3

      Removal and chasing

      Old wiring comes out with the power off, and cable routes are prepared.

    4. 4

      Installation and panel

      We lay cable, make the joints in junction boxes and bring circuits into the panel.

    5. 5

      Testing and handover

      We test insulation, check every circuit and hand over the photo report and diagram.

    Related jobs

    Electrical panelNew panel with breakers, RCDs, labels and a diagramElectrical inspectionPanel, circuits, insulation and thermal imaging — photo report
    Wall plasteringGypsum and cement plaster to screeds, reveals, mesh reinforcement

    More services: electrician

    All prices
    Sockets and switchesInstall, relocate, new points, weatherproof and USB socketsLighting installationChandeliers, downlights, track lights, LED strips and dimmersElectric underfloor heatingMat, cable or film, thermostat and a dedicated circuit
    Voltage stabiliser & relayStabiliser, voltage relay, SPD, RCD and earthing checkAppliance connectionHob, oven, water heater, dishwasher and washing machineFault findingTripping breaker, no power, burning smell — we find the cause

    FAQ

    How much does rewiring cost?

    Labour is from 40 ₾ per m² of the flat. Old wiring removal is 8 ₾/m², chasing and cable laying is 15 ₾ per metre. We give the exact total after a survey and fix it before work starts.

    Can I keep the aluminium wiring?

    Older Batumi buildings still have it. Aluminium oxidises over time and holds contacts poorly under modern appliance loads, so during renovation we recommend replacing it with copper.

    Can you rewire only part of the flat?

    Yes, if the rest is in good condition. We test the circuits and insulation first, then tell you honestly what is worth keeping.

    Do I need to be in Batumi during the work?

    No. We agree the plan and estimate on WhatsApp or Telegram, send photos as we go and a photo report of hidden work before walls are closed.

    Do you connect the flat to the grid and meter?

    Grid connection and meter work are done by the power company. We handle everything inside the flat: circuits, boxes and the panel.

    Rewiring in Batumi: when it is time and how it is done

    Wiring lasts longer than decoration, but not for ever. In buildings from past decades, aluminium still runs through the walls, designed for a light bulb and a fridge rather than an air conditioner in every room, a water heater and an induction hob. In new builds it is a different story: the developer may have laid cable thinner than the real load requires, or used twisted joints where terminals are needed. Rewiring in Batumi solves both problems: your flat gets copper circuits sized for the appliances you actually use.

    Why aluminium is best not left in place

    An aluminium conductor oxidises over time, the contact in the socket and terminal weakens, and the joint heats up. Under the load of an air conditioner or electric cooker the heating increases, the insulation becomes brittle, and at some point a burning smell appears. Copper conducts current better and holds a more stable contact, so when rewiring we move the flat over to copper cable.

    If the wiring is generally sound and the problem is in one room or one circuit, a full rewire may not be necessary. We decide after testing the circuits and measuring the insulation resistance, not by eye.

    What the work includes

    • Removing the old wiring: from 8 ₾ per m².
    • Chasing and laying cable in concrete, brick or aerated block: from 15 ₾ per metre of chase.
    • Complete rewiring: from 40 ₾ per m² of flat area.
    • Low-voltage lines for internet and TV: from 30 ₾ per point.
    • Insulation resistance test: from 100 ₾.

    Cable, boxes and circuit breakers are bought separately. The full cost is fixed in the quote after an inspection.

    How rewiring goes

    1. Inspection of the flat and a design: how many circuits, where the sockets go, which appliance is on which circuit.
    2. An itemised quote.
    3. Removing the old cables and chasing.
    4. Laying the new circuits, connecting to the panel.
    5. Insulation test and handover.

    A separate word about concealed work. Before the chases are closed with plaster, you get a photo report showing where each cable runs. A year later, when you need to hang a shelf or a picture, that photo will tell you where not to drill. After installation we hand over a circuit diagram.

    If you are not in Batumi

    We agree the quote and design by message; you do not need to come to the site. The photos of the concealed work and the final diagram are sent the same way.

    Where our area of responsibility ends

    The meter and the flat's connection to the city grid are the responsibility of the energy company. We are responsible for everything after the meter: circuits, junction boxes, the panel. New wiring comes with a one-year guarantee.

    Let's talk about rewiring

    Send us the flat size and a couple of photos of the panel — we'll outline the scope and a rough price.

    Message us on WhatsApp Message us on Telegram